Build Instructions for: Runaway Mountain
by: Rct2_cool
File Format: RCT 2 (no expansions)
Ride Type: Looping Roller Coaster (RCT2)
Vehicle Type: (Roller Coaster Trains)
Operating Mode:
Track Segments (Total): 62
Segment Number Type
11Middle station (1)
21End station (1)
3-42Right curve [R2] (1)
51Level to up [chain lift] (1 to 2)
61Up [chain lift] (2 to 3)
71Up [chain lift] (3 to 4)
81Up [chain lift] (4 to 5)
91Up [chain lift] (5 to 6)
101Up [chain lift] (6 to 7)
111Up [chain lift] (7 to 8)
121Up [chain lift] (8 to 9)
131Up to level [chain lift] (9)
141Level to left bank slope down (9 to 8)
151Banked left curve down [R2] (8 to 6)
161Banked left curve down [R2] (6 to 4)
171Banked left curve down [R3] (4 to 0)
181Left bank slope down to left bank (0)
191Helix down left [R3] (0 to -1)
201Banked left curve [R3] (-1)
211Roll left to level (-1)
221Level (-1)
231Level to up (-1 to 0)
241Up to up steep (0 to 2)
251Up steep to up (2 to 4)
261Up to level (4)
27-282Level (4)
291Level to down (4 to 3)
301Down to down steep (3 to 1)
311Down steep to down (1 to -1)
321Down to level (-1)
331Level to roll left (-1)
34-352Banked left curve [R3] (-1)
36-372Banked left curve [R4] (-1)
381Roll left to level (-1)
391Level to roll right (-1)
401Banked right curve [R2] (-1)
411Right bank to right bank slope up (-1 to 0)
421Banked right curve up [R2] (0 to 2)
431Right bank slope up to level (2)
441Level to roll left (2)
451Banked left curve [R3] (2)
461Roll left to slope down (2 to 1)
471Down to level, roll left (1)
481Banked left curve [R2] (1)
491Roll left to level (1)
501Level to roll right (1)
51-522Banked right curve [R2] (1)
531Banked right curve [R4] (1)
541Roll right [diag] (1)
551Banked right curve [R4] (1)
561Roll right to level (1)
571Block brake (1)
581Brakes [18 mph = 30 km/hr] (1)
591Block brake (1)
601Brakes [18 mph = 30 km/hr] (1)
611Begin station (1)
621Middle station (1)
This file was created in the RCTspace.com Ride Exchange for RCT1 and RCT2 Rides © rcthelp 2003 to the present.
Not to be reproduced without expressed permission.
With thanks to Greg Wolking for permission to use his RCT Track Decoder program.