Build Instructions for: Spitting Cobra
by: hagfish
File Format: RCT 2 (no expansions)
Ride Type: Inverted Impulse Coaster (RCT2)
Vehicle Type:
Operating Mode:
Track Segments (Total): 72
Segment Number Type
11Middle station (1)
21End station (1)
31Level to up (1 to 2)
41Up to up steep (2 to 4)
51Up steep to vertical (4 to 7)
61Vertical slope up (7 to 9)
71Vertical slope up (9 to 11)
81Vertical slope up (11 to 13)
91Vertical slope up (13 to 15)
101Vertical slope up (15 to 17)
111Vertical to up steep (17 to 21)
121Up steep to up (21 to 23)
131Up to level (23)
141Level to down (23 to 22)
151Down to down steep (22 to 20)
161Down steep to vertical (20 to 16)
171Vertical twist down right (16 to 10)
181Vertical twist down right (10 to 4)
191Vertical slope down (4 to 2)
201Vertical to down steep (2 to -1)
211Down steep to down (-1 to -3)
221Down to level (-3)
23-3715Level (-3)
381Level to up (-3 to -2)
391Up to up steep (-2 to 0)
401Up steep to vertical (0 to 3)
411Vertical slope up (3 to 5)
421Vertical slope up (5 to 7)
431Vertical slope up (7 to 9)
441Vertical twist up left (9 to 15)
451Vertical to up steep (15 to 19)
461Up steep to up (19 to 21)
471Up to level (21)
481Level to down (21 to 20)
491Down to down steep (20 to 18)
501Down steep to vertical (18 to 14)
511Vertical twist down left (14 to 8)
521Vertical to down steep (8 to 5)
531Down steep to down (5 to 3)
541Down to level (3)
551Level to up (3 to 4)
561Up to up steep (4 to 6)
571Up steep to vertical (6 to 9)
581Vertical twist up left (9 to 15)
591Vertical to up steep (15 to 19)
601Up steep to up (19 to 21)
611Up to level (21)
621Level to down (21 to 20)
631Down to down steep (20 to 18)
641Down steep to vertical (18 to 14)
651Vertical twist down right (14 to 8)
661Vertical slope down (8 to 6)
671Vertical to down steep (6 to 3)
681Down steep to down (3 to 1)
691Down to level (1)
701Begin station (1)
71-722Middle station (1)
This file was created in the RCTspace.com Ride Exchange for RCT1 and RCT2 Rides © rcthelp 2003 to the present.
Not to be reproduced without expressed permission.
With thanks to Greg Wolking for permission to use his RCT Track Decoder program.