Build Instructions for: Collossal
by: Rct2_cool
File Format: RCT 2 (no expansions)
Ride Type: Inverted Vertical Shuttle Coaster (RCT2)
Vehicle Type:
Operating Mode:
Track Segments (Total): 63
Segment Number Type
11Vertical slope down [chain lift] (0 to -1)
21Vertical slope down [chain lift] (-1 to -3)
31Vertical slope down [chain lift] (-3 to -5)
41Vertical slope down [chain lift] (-5 to -7)
51Vertical slope down [chain lift] (-7 to -9)
61Vertical slope down [chain lift] (-9 to -11)
71Vertical slope down [chain lift] (-11 to -13)
81Vertical slope down [chain lift] (-13 to -15)
91Vertical slope down [chain lift] (-15 to -17)
101Vertical to down steep [chain lift] (-17 to -21)
111Down steep to down [chain lift] (-21 to -23)
121Down to level [chain lift] (-23)
131Begin station (-23)
14-207Middle station (-23)
211End station (-23)
221Level to up (-23 to -22)
231Vertical loop right (-22 to -23)
241Down (-23 to -24)
251Down to level (-24)
261Level to up (-24 to -23)
271Vertical loop left (-23 to -24)
281Down to level (-24)
291Level to up (-24 to -23)
301Half loop, normal to inverted (-23 to -14)
311Half-corkscrew left, inverted to normal (-14 to -19)
321Half-corkscrew left, normal to inverted (-19 to -14)
331Half loop, inverted to normal (-14 to -24)
341Down to level (-24)
351Level to up (-24 to -23)
361Vertical loop right (-23 to -24)
371Down to level (-24)
381Level to up (-24 to -23)
391Up to level (-23)
401On-ride photo section (-23)
41-5111Level (-23)
521Level to up (-23 to -22)
531Up to up steep (-22 to -20)
541Up steep to vertical (-20 to -16)
551Vertical slope up (-16 to -14)
561Vertical slope up (-14 to -12)
571Vertical slope up (-12 to -10)
581Vertical slope up (-10 to -8)
591Vertical slope up (-8 to -6)
601Vertical slope up (-6 to -4)
611Vertical slope up (-4 to -2)
621Vertical slope up (-2 to 0)
631Vertical slope up (0 to 1)
This file was created in the RCTspace.com Ride Exchange for RCT1 and RCT2 Rides © rcthelp 2003 to the present.
Not to be reproduced without expressed permission.
With thanks to Greg Wolking for permission to use his RCT Track Decoder program.