Build Instructions for: Koshi
by: Billimoria
File Format: RCT 2 (no expansions)
Ride Type: LIM Launched Roller Coaster (RCT2)
Vehicle Type:
Operating Mode:
Track Segments (Total): 60
Segment Number Type
11Middle station (1)
21End station (1)
31Level (1)
41Level to up (1 to 2)
51Up to up steep (2 to 4)
61Up steep to vertical (4 to 7)
71Quarter loop up (7 to 15)
81Half-corkscrew left, inverted to normal (15 to 10)
91Level to roll left (10)
101Helix up left [R3] (10 to 11)
111Helix up left [R2] (11 to 12)
121Helix up left [R2] (12 to 13)
131Helix up left [R2] (13 to 14)
141Banked left curve [R3] (14)
151Roll left to level (14)
161Level to roll right (14)
171Helix down right [R2] (14 to 13)
181Helix down right [R2] (13 to 12)
191Roll right to level (12)
201Level to roll left (12)
21-222Banked left curve [R4] (12)
231Roll left to level (12)
241Block brake (12)
251Level to left bank slope down (12 to 11)
261Banked left curve down [R2] (11 to 9)
271Banked left curve down [R2] (9 to 7)
281Banked left curve down [R2] (7 to 5)
291Left bank slope down to level (5)
301Level to roll right (5)
311Helix down right [R2] (5 to 4)
321Helix down right [R2] (4 to 3)
331Roll right (3)
34-352Banked right curve [R4] (3)
361Banked right curve [R3] (3)
371Right bank to right bank slope down (3 to 2)
381Right bank slope down to right bank (2)
391Roll right (2)
40-412Banked right curve [R4] (2)
421Roll right to slope up (2 to 3)
431Vertical loop left (3 to 2)
441Down (2 to 1)
451Down to level, roll left (1)
461Banked left curve [R2] (1)
471Roll left to level (1)
481Inline twist right, normal to inverted (1 to 2)
491Inline twist right, inverted to normal (2 to 1)
501On-ride photo section (1)
51-522Level (1)
531Block brake (1)
541Level to roll left (1)
551Banked left curve [R2] (1)
561Banked left curve [R3] (1)
571Roll left to level (1)
581Begin station (1)
59-602Middle station (1)
This file was created in the RCTspace.com Ride Exchange for RCT1 and RCT2 Rides © rcthelp 2003 to the present.
Not to be reproduced without expressed permission.
With thanks to Greg Wolking for permission to use his RCT Track Decoder program.