Build Instructions for: Python
by: coastercrazy51289
File Format: RCT 2 (no expansions)
Ride Type: Corkscrew Roller Coaster (RCT2)
Vehicle Type:
Operating Mode:
Track Segments (Total): 70
Segment Number Type
11Middle station (1)
21End station (1)
31Level to down (1 to 0)
41Down to level (0)
5-62Left curve [R2] (0)
71Level to up [chain lift] (0 to 1)
81Up [chain lift] (1 to 2)
91Up [chain lift] (2 to 3)
101Up [chain lift] (3 to 4)
111Up [chain lift] (4 to 5)
121Up [chain lift] (5 to 6)
131Up [chain lift] (6 to 7)
141Up [chain lift] (7 to 8)
151Up [chain lift] (8 to 9)
161Up [chain lift] (9 to 10)
171Up [chain lift] (10 to 11)
181Up [chain lift] (11 to 12)
191Up to level [chain lift] (12)
201Level to down (12 to 11)
211Down to level (11)
22-232Right curve [R2] (11)
241Level to down (11 to 10)
251Down to down steep (10 to 8)
261Down steep (8 to 4)
271Down steep (4 to 0)
281Down steep to down (0 to -2)
291Down to level (-2)
301Level to up (-2 to -1)
311Up to up steep (-1 to 1)
321Up steep (1 to 5)
331Up steep to up (5 to 7)
341Up to level (7)
351Level to down (7 to 6)
361Down to down steep (6 to 4)
371Down steep (4 to 0)
381Down steep to down (0 to -2)
391Down to level (-2)
401Level to up (-2 to -1)
411Up (-1 to 0)
421Up (0 to 1)
431Up (1 to 2)
441Right curve up [R3] (2 to 6)
451Up to level (6)
461Level to down (6 to 5)
471Right curve down [R3] (5 to 1)
481Down (1 to 0)
491Down (0 to -1)
501Down to level (-1)
511Half-corkscrew left, normal to inverted (-1 to 4)
521Half-corkscrew right, inverted to normal (4 to -1)
531Half-corkscrew left, normal to inverted (-1 to 4)
541Half-corkscrew right, inverted to normal (4 to -1)
551Level to up (-1 to 0)
561Up (0 to 1)
571Up to level (1)
58-592Level (1)
601Brakes [14 mph = 23 km/hr] (1)
611Right curve [R3] (1)
621Level (1)
631Brakes [9 mph = 15 km/hr] (1)
641Right curve [R3] (1)
651Block brake (1)
661Begin station (1)
67-704Middle station (1)
This file was created in the RCTspace.com Ride Exchange for RCT1 and RCT2 Rides © rcthelp 2003 to the present.
Not to be reproduced without expressed permission.
With thanks to Greg Wolking for permission to use his RCT Track Decoder program.