Build Instructions for: Wild Cat
by: Risingers
File Format: RCT 2 (no expansions)
Ride Type: Wooden Roller Coaster (RCT2)
Vehicle Type: (Wooden Roller Coaster Trains)
Operating Mode:
Track Segments (Total): 66
Segment Number Type
11Middle station (1)
21End station (1)
31Left curve [R2] (1)
41Level to up [chain lift] (1 to 2)
51Up [chain lift] (2 to 3)
61Up [chain lift] (3 to 4)
71Up [chain lift] (4 to 5)
81Up [chain lift] (5 to 6)
91Up [chain lift] (6 to 7)
101Up [chain lift] (7 to 8)
111Up [chain lift] (8 to 9)
121Up to level [chain lift] (9)
13-142Left curve [R2] (9)
151Level to down (9 to 8)
161Down to down steep (8 to 6)
171Down steep (6 to 2)
181Down steep to down (2 to 0)
191Down to level (0)
201Level to roll left (0)
21-222Banked left curve [R2] (0)
231Roll left (0)
24-252Banked left curve [R4] (0)
261Roll left to slope up (0 to 1)
271Up to up steep (1 to 3)
281Up steep to up (3 to 5)
291Up to level (5)
301Level to roll left (5)
31-322Banked left curve [R2] (5)
331Roll left to level (5)
341Level to roll right (5)
351Helix down right [R3] (5 to 4)
361Helix down right [R3] (4 to 3)
371Roll right to slope down (3 to 2)
381Down to level (2)
391Level to up (2 to 3)
401Up to level (3)
411Level (3)
421Level to down (3 to 2)
431Slope down to sloped right bank (2 to 1)
441Banked right curve down [R2] (1 to -1)
451Right bank slope down to right bank (-1)
461Banked right curve [R2] (-1)
471Roll right to slope up (-1 to 0)
481Up (0 to 1)
491Up (1 to 2)
501Up to level (2)
511Level to right bank slope down (2 to 1)
521Banked right curve down [R2] (1 to -1)
531Right bank slope down to level (-1)
541Level to roll left (-1)
551Helix up left [R3] (-1 to 0)
561Roll left to slope up (0 to 1)
571Up to level (1)
581Brakes [18 mph = 30 km/hr] (1)
591Brakes [14 mph = 23 km/hr] (1)
601Left curve [R2] (1)
611Block brake (1)
621Begin station (1)
63-664Middle station (1)
This file was created in the RCTspace.com Ride Exchange for RCT1 and RCT2 Rides © rcthelp 2003 to the present.
Not to be reproduced without expressed permission.
With thanks to Greg Wolking for permission to use his RCT Track Decoder program.