Build Instructions for: Vortex
by: dbronzman
File Format: RCT 2 (no expansions)
Ride Type: Stand-up Twister Coaster (RCT2)
Vehicle Type:
Operating Mode:
Track Segments (Total): 68
Segment Number Type
11Middle station (1)
21End station (1)
31Level to down (1 to 0)
41Down (0 to -1)
51Down to level (-1)
6-72Left curve [R3] (-1)
81Level to up [chain lift] (-1 to 0)
91Up [chain lift] (0 to 1)
101Up [chain lift] (1 to 2)
111Up [chain lift] (2 to 3)
121Up [chain lift] (3 to 4)
131Up [chain lift] (4 to 5)
141Up [chain lift] (5 to 6)
151Up [chain lift] (6 to 7)
161Up [chain lift] (7 to 8)
171Up [chain lift] (8 to 9)
181Up [chain lift] (9 to 10)
191Up [chain lift] (10 to 11)
201Up [chain lift] (11 to 12)
211Up [chain lift] (12 to 13)
221Up [chain lift] (13 to 14)
231Up [chain lift] (14 to 15)
241Up [chain lift] (15 to 16)
251Up to level [chain lift] (16)
261Level to down (16 to 15)
271Down to down steep (15 to 13)
281Steep downward twist left [R1] (13 to 9)
291Down steep (9 to 5)
301Down steep (5 to 1)
311Down steep to down (1 to -1)
321Down to level (-1)
331Level to up (-1 to 0)
341Large half loop left, normal to inverted (0 to 17)
351Large half loop right, inverted to normal (17 to -1)
361Down to level (-1)
371Level to up (-1 to 0)
381Right curve up [R3] (0 to 4)
391Right curve up [R3] (4 to 8)
401Up (8 to 9)
411Right curve up [R3] (9 to 13)
421Up to level (13)
431Level (13)
441Left curve [R2] (13)
451Parabolic level to down steep (13 to 7)
461Parabolic down steep to level (7 to 2)
471Half-corkscrew left, normal to inverted (2 to 7)
481Half-corkscrew right, inverted to normal (7 to 2)
49-502Left curve [R3] (2)
51-522Level (2)
531Left curve [R3] (2)
541Level to down (2 to 1)
551Down to level (1)
561Right curve [R3] (1)
571Left curve [R3] (1)
58-592Brakes [4 mph = 8 km/hr] (1)
601Begin station (1)
61-688Middle station (1)
This file was created in the RCTspace.com Ride Exchange for RCT1 and RCT2 Rides © rcthelp 2003 to the present.
Not to be reproduced without expressed permission.
With thanks to Greg Wolking for permission to use his RCT Track Decoder program.