Build Instructions for: Maximum Voltage
by: Trainman 2000
File Format: RCT 2 (no expansions)
Ride Type: Vertical Drop Roller Coaster (RCT2)
Vehicle Type:
Operating Mode:
Track Segments (Total): 56
Segment Number Type
11Middle station (1)
21End station (1)
31Level to up steep [chain lift] (1 to 3)
41Up steep [chain lift] (3 to 7)
51Up steep [chain lift] (7 to 11)
61Up steep [chain lift] (11 to 15)
71Up steep [chain lift] (15 to 19)
81Up steep to level [chain lift] (19 to 20)
91Holding brake for vertical drop (20 to 18)
101Steep downward twist right [R1] (18 to 14)
111Steep downward twist right [R1] (14 to 10)
121Down steep (10 to 6)
131Down steep (6 to 2)
141Down steep to level (2 to 1)
151Level to up (1 to 2)
161Vertical loop left (2 to 1)
171Down to level (1)
181Level to up steep (1 to 3)
191Steep upward twist right [R1] (3 to 7)
201Up steep to level (7 to 8)
211Level to down steep (8 to 6)
221Steep downward twist left [R1] (6 to 2)
231Down steep to level (2 to 1)
241Level to up steep (1 to 3)
251Up steep (3 to 7)
261Steep upward twist left [R1] (7 to 11)
271Up steep to level (11 to 12)
281Level to down steep (12 to 10)
291Down steep (10 to 6)
301Steep downward twist left [R1] (6 to 2)
311Down steep to level (2 to 1)
321Level to up steep (1 to 3)
331Steep upward twist left [R1] (3 to 7)
341Up steep to level (7 to 8)
351Level to down steep (8 to 6)
361Down steep to level (6 to 5)
371Level to roll left (5)
381Banked left curve [R2] (5)
391Banked left curve [R3] (5)
401Banked left curve [R2] (5)
411Roll left to level (5)
42-432Level (5)
441Level to roll right (5)
45-462Banked right curve [R2] (5)
471Roll right to slope down (5 to 4)
481Down to down steep (4 to 2)
491Down steep to level (2 to 1)
501Level to roll right (1)
511Banked right curve [R3] (1)
521Banked right curve [R2] (1)
531Roll right to level (1)
541Begin station (1)
55-562Middle station (1)
This file was created in the RCTspace.com Ride Exchange for RCT1 and RCT2 Rides © rcthelp 2003 to the present.
Not to be reproduced without expressed permission.
With thanks to Greg Wolking for permission to use his RCT Track Decoder program.