Build Instructions for: King of Beasts
by: mattec222
File Format: RCT 2 (no expansions)
Ride Type: Stand-up Roller Coaster (RCT2)
Vehicle Type:
Operating Mode:
Track Segments (Total): 65
Segment Number Type
11Middle station (1)
21End station (1)
31Right curve [R2] (1)
41Left curve [R2] (1)
51Level to up [chain lift] (1 to 2)
61Up [chain lift] (2 to 3)
71Up [chain lift] (3 to 4)
81Up [chain lift] (4 to 5)
91Up [chain lift] (5 to 6)
101Up [chain lift] (6 to 7)
111Up [chain lift] (7 to 8)
121Up [chain lift] (8 to 9)
131Up [chain lift] (9 to 10)
141Up to level [chain lift] (10)
151Left curve [R2] (10)
161Level to down (10 to 9)
171Down to down steep (9 to 7)
181Down steep (7 to 3)
191Down steep to down (3 to 1)
201Down to level, roll right (1)
211Banked right curve [R3] (1)
221Roll right to slope up (1 to 2)
231Half loop, normal to inverted (2 to 11)
241Half-corkscrew left, inverted to normal (11 to 6)
251Half-corkscrew right, normal to inverted (6 to 11)
261Half loop, inverted to normal (11 to 1)
271Down to level, roll left (1)
28-292Banked left curve [R3] (1)
30-312Roll left (1)
321Banked left curve [R3] (1)
331Roll left to slope up (1 to 2)
341Vertical loop right (2 to 1)
351Down to level, roll right (1)
361Banked right curve [R4] (1)
37-382Roll right [diag] (1)
391Banked right curve [R4] (1)
401Roll right to slope up (1 to 2)
411Up (2 to 3)
421Up (3 to 4)
431Up to level (4)
441Level to down (4 to 3)
451Down (3 to 2)
461Down (2 to 1)
471Down to level (1)
481Half-corkscrew left, normal to inverted (1 to 6)
491Half-corkscrew right, inverted to normal (6 to 1)
501Half-corkscrew left, normal to inverted (1 to 6)
511Half-corkscrew right, inverted to normal (6 to 1)
521Level to roll right (1)
531Banked right curve [R3] (1)
541Roll right to slope up (1 to 2)
551Up to level (2)
561Level to down (2 to 1)
571Down to level (1)
581Brakes [9 mph = 15 km/hr] (1)
591Right curve [R3] (1)
601Block brake (1)
611Begin station (1)
62-654Middle station (1)
This file was created in the RCTspace.com Ride Exchange for RCT1 and RCT2 Rides © rcthelp 2003 to the present.
Not to be reproduced without expressed permission.
With thanks to Greg Wolking for permission to use his RCT Track Decoder program.