Build Instructions for: Invertigo
by: Trainman 2000
File Format: RCT 2 (no expansions)
Ride Type: Inverted Vertical Shuttle Coaster (RCT2)
Vehicle Type:
Operating Mode:
Track Segments (Total): 47
Segment Number Type
11Vertical slope down [chain lift] (0 to -1)
21Vertical slope down [chain lift] (-1 to -3)
31Vertical slope down [chain lift] (-3 to -5)
41Vertical slope down [chain lift] (-5 to -7)
51Vertical slope down [chain lift] (-7 to -9)
61Vertical slope down [chain lift] (-9 to -11)
71Vertical slope down [chain lift] (-11 to -13)
81Vertical slope down [chain lift] (-13 to -15)
91Vertical slope down [chain lift] (-15 to -17)
101Vertical slope down [chain lift] (-17 to -19)
111Vertical to down steep [chain lift] (-19 to -23)
121Down steep to down [chain lift] (-23 to -25)
131Down to level [chain lift] (-25)
141On-ride photo section (-25)
151Begin station (-25)
16-183Middle station (-25)
191End station (-25)
201Level to up (-25 to -24)
211Up to level, roll right (-24)
221Helix up right [R3] (-24 to -23)
231Helix up right [R3] (-23 to -22)
241Helix up right [R3] (-22 to -21)
251Helix up right [R3] (-21 to -20)
261Roll right to slope up (-20 to -19)
271Half loop, normal to inverted (-19 to -10)
281Inline twist left, inverted to normal (-10 to -11)
291Level (-11)
301Inline twist right, normal to inverted (-11 to -10)
311Half loop, inverted to normal (-10 to -20)
321Down to level, roll left (-20)
33-342Banked left curve [R2] (-20)
351Helix down left [R3] (-20 to -21)
361Roll left to level (-21)
371Level to roll right (-21)
381Roll right to slope up (-21 to -20)
391Up to up steep (-20 to -18)
401Up steep to vertical (-18 to -14)
411Vertical slope up (-14 to -12)
421Vertical slope up (-12 to -10)
431Vertical slope up (-10 to -8)
441Vertical slope up (-8 to -6)
451Vertical slope up (-6 to -4)
461Vertical slope up (-4 to -2)
471Vertical slope up (-2 to 0)
This file was created in the RCTspace.com Ride Exchange for RCT1 and RCT2 Rides © rcthelp 2003 to the present.
Not to be reproduced without expressed permission.
With thanks to Greg Wolking for permission to use his RCT Track Decoder program.