Build Instructions for: Twistectomy
by: Trainman 2000
File Format: RCT 2 (no expansions)
Ride Type: LIM Launched Roller Coaster (RCT2)
Vehicle Type:
Operating Mode:
Track Segments (Total): 79
Segment Number Type
11Middle station (1)
21End station (1)
3-1311Level (1)
141Level to up (1 to 2)
151Up to up steep (2 to 4)
161Up steep to vertical (4 to 7)
171Quarter loop up (7 to 15)
181Half-corkscrew right, inverted to normal (15 to 10)
191Half-corkscrew right, normal to inverted (10 to 15)
201Quarter loop down (15 to 6)
211Vertical slope down (6 to 4)
221Vertical slope down (4 to 2)
231Vertical slope down (2 to 0)
241Vertical slope down (0 to -1)
251Vertical slope down (-1 to -3)
261Vertical to down steep (-3 to -7)
271Down steep to down (-7 to -9)
281Down to level (-9)
291Level to up (-9 to -8)
301Slope up to sloped left bank (-8 to -7)
311Banked left curve up [R3] (-7 to -3)
321Banked left curve up [R3] (-3 to 1)
331Banked left curve up [R3] (1 to 5)
341Banked left curve up [R3] (5 to 9)
351Left bank slope up to level (9)
361Level to down (9 to 8)
371Down to down steep (8 to 6)
381Down steep to vertical (6 to 2)
391Vertical slope down (2 to 0)
401Vertical slope down (0 to -1)
411Vertical slope down (-1 to -3)
421Vertical to down steep (-3 to -7)
431Down steep to down (-7 to -9)
441Down to level, roll left (-9)
451Helix up left [R3] (-9 to -8)
461Helix up left [R2] (-8 to -7)
471Helix up left [R2] (-7 to -6)
481Helix up left [R2] (-6 to -5)
491Helix up left [R3] (-5 to -4)
501Helix up left [R3] (-4 to -3)
511Helix up left [R2] (-3 to -2)
521Helix up left [R2] (-2 to -1)
531Helix up left [R3] (-1 to 0)
541Helix up left [R2] (0 to 1)
551Helix up left [R3] (1 to 2)
561Helix up left [R2] (2 to 3)
571Roll left to level (3)
58-614Level (3)
621Level to down (3 to 2)
631Down (2 to 1)
641Down to level (1)
651On-ride photo section (1)
66-694Brakes [18 mph = 30 km/hr] (1)
70-712Right curve [R2] (1)
721Begin station (1)
73-797Middle station (1)
This file was created in the RCTspace.com Ride Exchange for RCT1 and RCT2 Rides © rcthelp 2003 to the present.
Not to be reproduced without expressed permission.
With thanks to Greg Wolking for permission to use his RCT Track Decoder program.