Build Instructions for: Stampede!
by: Frontier Developments
File Format: Time Twisters Compatible
Ride Type: Stampeding Herd (TT)
Vehicle Type:
Operating Mode:
Track Segments (Total): 72
Segment Number Type
11Middle station (1)
21End station (1)
31Left curve [R2] (1)
41Level to up [chain lift] (1 to 2)
51Up [chain lift] (2 to 3)
61Up [chain lift] (3 to 4)
71Up [chain lift] (4 to 5)
81Up [chain lift] (5 to 6)
91Up [chain lift] (6 to 7)
101Up [chain lift] (7 to 8)
111Up [chain lift] (8 to 9)
121Up [chain lift] (9 to 10)
131Up to level [chain lift] (10)
14-152Left curve [R2] (10)
161Level to down (10 to 9)
171Down to down steep (9 to 7)
181Down steep (7 to 3)
191Down steep to down (3 to 1)
201Down to level (1)
211Level to up (1 to 2)
221Up to up steep (2 to 4)
231Up steep to up (4 to 6)
241Up to level (6)
251Level to down (6 to 5)
261Down (5 to 4)
271Down to level (4)
281Half-corkscrew right, normal to inverted (4 to 9)
291Half loop, inverted to normal (9 to -1)
301Down to level, roll left (-1)
31-366Banked left curve [R4] (-1)
37-382Banked left curve [R3] (-1)
391Roll left to slope up (-1 to 0)
401Up to up steep (0 to 2)
411Up steep to up (2 to 4)
421Up to level (4)
431Level to down (4 to 3)
441Down to down steep (3 to 1)
451Down steep to down (1 to -1)
461Down to level, roll left (-1)
47-493Banked left curve [R3] (-1)
501Roll left to level (-1)
511Level (-1)
521Half-corkscrew left, normal to inverted (-1 to 4)
531Half-corkscrew right, inverted to normal (4 to -1)
541Level to roll left (-1)
551Helix up left [R2] (-1 to 0)
561Banked left curve [R4] (0)
571Roll left to up [diag] (0 to 1)
581Up to roll right [diag] (1)
591Banked right curve [R4] (1)
601Roll right to level (1)
611Level to roll left (1)
621Banked left curve [R2] (1)
631Roll left to level (1)
64-663Level (1)
67-682Brakes [18 mph = 30 km/hr] (1)
691Left curve [R2] (1)
701Block brake (1)
711Begin station (1)
721Middle station (1)
This file was created in the RCTspace.com Ride Exchange for RCT1 and RCT2 Rides © rcthelp 2003 to the present.
Not to be reproduced without expressed permission.
With thanks to Greg Wolking for permission to use his RCT Track Decoder program.