Build Instructions for: Compact Inverted Coaster
by: Frontier Developments
File Format: RCT 2 (no expansions)
Ride Type: Compact Inverted Coaster (RCT2)
Vehicle Type:
Operating Mode:
Track Segments (Total): 56
Segment Number Type
11Middle station (1)
21End station (1)
31Level to up [chain lift] (1 to 2)
41Up [chain lift] (2 to 3)
51Up [chain lift] (3 to 4)
61Up [chain lift] (4 to 5)
71Up [chain lift] (5 to 6)
81Up [chain lift] (6 to 7)
91Up to level [chain lift] (7)
101Level to down (7 to 6)
111Down to level (6)
12-132Left curve [R2] (6)
141Level (6)
151Level to up [chain lift] (6 to 7)
161Up [chain lift] (7 to 8)
171Up [chain lift] (8 to 9)
181Up [chain lift] (9 to 10)
191Up [chain lift] (10 to 11)
201Up [chain lift] (11 to 12)
211Up to level [chain lift] (12)
221Level to down (12 to 11)
231Left curve down [R3] (11 to 7)
241Down to level, roll right (7)
251Banked right curve [R3] (7)
261Roll right to level (7)
271Level to roll left (7)
28-292Banked left curve [R2] (7)
301Roll left to level (7)
311Inline twist left, normal to inverted (7 to 8)
321Inline twist left, inverted to normal (8 to 7)
331Level to down (7 to 6)
341Down to down steep (6 to 4)
351Down steep to down (4 to 2)
361Down (2 to 1)
371Down to level (1)
381Level to up (1 to 2)
391Half loop, normal to inverted (2 to 11)
401Half-corkscrew right, inverted to normal (11 to 6)
411Half-corkscrew right, normal to inverted (6 to 11)
421Half loop, inverted to normal (11 to 1)
431Down to level (1)
441Inline twist right, normal to inverted (1 to 2)
451Inline twist right, inverted to normal (2 to 1)
461Inline twist right, normal to inverted (1 to 2)
471Inline twist right, inverted to normal (2 to 1)
481Level to roll right (1)
49-502Banked right curve [R2] (1)
511Roll right to level (1)
521Level (1)
531Brakes [32 mph = 53 km/hr] (1)
541Brakes [27 mph = 46 km/hr] (1)
551Brakes [22 mph = 38 km/hr] (1)
561Begin station (1)
This file was created in the RCTspace.com Ride Exchange for RCT1 and RCT2 Rides © rcthelp 2003 to the present.
Not to be reproduced without expressed permission.
With thanks to Greg Wolking for permission to use his RCT Track Decoder program.