Build Instructions for: Phantom of the Opry
by:
File Format: RCT 1 (no expansions)
Ride Type: Wooden (RCT1)
Vehicle Type:
Operating Mode:
Track Segments (Total): 78
Segment Number Type
11Middle station (1)
21End station (1)
31Level to up [chain lift] (1 to 2)
41Up [chain lift] (2 to 3)
51Up [chain lift] (3 to 4)
61Up [chain lift] (4 to 5)
71Up [chain lift] (5 to 6)
81Up [chain lift] (6 to 7)
91Up [chain lift] (7 to 8)
101Up [chain lift] (8 to 9)
111Up [chain lift] (9 to 10)
121Up to level [chain lift] (10)
131Level to down (10 to 9)
141Down to down steep (9 to 7)
151Down steep (7 to 3)
161Down steep to down (3 to 1)
171Down to level, roll right (1)
181Banked right curve [R2] (1)
191Banked right curve [R3] (1)
20-223Banked right curve [R4] (1)
231Roll right to level [diag] (1)
241Left curve [R4] (1)
251Left curve [R2] (1)
261Level to up (1 to 2)
271Up [chain lift] (2 to 3)
281Up [chain lift] (3 to 4)
291Up [chain lift] (4 to 5)
301Up [chain lift] (5 to 6)
311Up [chain lift] (6 to 7)
321Up [chain lift] (7 to 8)
331Up [chain lift] (8 to 9)
341Up [chain lift] (9 to 10)
351Up to level [chain lift] (10)
361Level to roll left (10)
371Banked left curve [R3] (10)
381Banked left curve [R2] (10)
391Roll left to slope down (10 to 9)
401Right curve down [R2] (9 to 7)
411Right curve down [R3] (7 to 3)
421Down (3 to 2)
431Down (2 to 1)
441Down to level (1)
451Left curve [R2] (1)
461Level to up (1 to 2)
471Up (2 to 3)
481Up (3 to 4)
491Up (4 to 5)
501Up (5 to 6)
511Up to level (6)
521Level to down (6 to 5)
531Down (5 to 4)
541Right curve down [R2] (4 to 2)
551Down (2 to 1)
561Down to level (1)
571Ess bend left (1)
581Right curve [R2] (1)
591Level to up (1 to 2)
601Up (2 to 3)
611Up (3 to 4)
621Up (4 to 5)
631Up to level (5)
641Level to down (5 to 4)
651Down (4 to 3)
661Down (3 to 2)
671Down (2 to 1)
681Down to level (1)
691Right curve [R2] (1)
70-723Brakes [18 mph = 30 km/hr] (1)
731Begin station (1)
74-785Middle station (1)
This file was created in the RCTspace.com Ride Exchange for RCT1 and RCT2 Rides © rcthelp 2003 to the present.
Not to be reproduced without expressed permission.
With thanks to Greg Wolking for permission to use his RCT Track Decoder program.