Build Instructions for: Shake
by: RCTcritic
File Format: RCT 1 (no expansions)
Ride Type: Bobsled (RCT1)
Vehicle Type:
Operating Mode:
Track Segments (Total): 73
Segment Number Type
11Middle station (1)
21End station (1)
31Left curve [R2] (1)
41Level to up [chain lift] (1 to 2)
51Up [chain lift] (2 to 3)
61Up [chain lift] (3 to 4)
71Up [chain lift] (4 to 5)
81Up [chain lift] (5 to 6)
91Up to level [chain lift] (6)
101Left curve [R2] (6)
111Level to up [chain lift] (6 to 7)
121Up [chain lift] (7 to 8)
131Up [chain lift] (8 to 9)
141Up to level [chain lift] (9)
151Left curve [R2] (9)
161Level to up [chain lift] (9 to 10)
171Up to level [chain lift] (10)
181Level to down (10 to 9)
191Down (9 to 8)
201Down (8 to 7)
211Down to level (7)
221Level to roll left (7)
231Banked left curve [R2] (7)
241Roll left to level (7)
251Level to roll right (7)
26-272Banked right curve [R3] (7)
281Roll right to level (7)
291Ess bend left (7)
301Level to roll left (7)
311Helix down left [R2] (7 to 6)
321Helix down left [R2] (6 to 5)
331Helix down left [R2] (5 to 4)
341Roll left to level (4)
35-373Level (4)
381Level to roll left (4)
391Helix up left [R2] (4 to 5)
401Helix up left [R2] (5 to 6)
411Helix up left [R2] (6 to 7)
421Roll left to level (7)
431Left curve [R2] (7)
44-452Level (7)
461Level to down (7 to 6)
471Down (6 to 5)
481Down to level, roll right (5)
491Banked right curve [R2] (5)
501Roll right (5)
511Banked right curve [R3] (5)
521Roll right to level (5)
531Level to roll left (5)
541Banked left curve [R2] (5)
551Roll left to level (5)
561Level to roll right (5)
571Banked right curve [R2] (5)
581Roll right (5)
591Banked right curve [R2] (5)
601Roll right to level (5)
611Left curve [R2] (5)
621Level to down (5 to 4)
631Down (4 to 3)
641Down (3 to 2)
651Down (2 to 1)
661Down to level (1)
67-682Right curve [R2] (1)
691Left curve [R2] (1)
701Begin station (1)
71-733Middle station (1)
This file was created in the RCTspace.com Ride Exchange for RCT1 and RCT2 Rides © rcthelp 2003 to the present.
Not to be reproduced without expressed permission.
With thanks to Greg Wolking for permission to use his RCT Track Decoder program.