Build Instructions for: Chocolate Log
by: Chris Sawyer
File Format: RCT 2 (no expansions)
Ride Type: Junior Roller Coaster (RCT2)
Vehicle Type: (Log Trains)
Operating Mode:
Track Segments (Total): 76
Segment Number Type
11Middle station (1)
21End station (1)
3-42Left curve [R2] (1)
51Level to up [chain lift] (1 to 2)
61Up [chain lift] (2 to 3)
71Up [chain lift] (3 to 4)
81Up [chain lift] (4 to 5)
91Up [chain lift] (5 to 6)
101Up [chain lift] (6 to 7)
111Up [chain lift] (7 to 8)
121Up [chain lift] (8 to 9)
131Up [chain lift] (9 to 10)
141Up [chain lift] (10 to 11)
151Up [chain lift] (11 to 12)
161Up to level [chain lift] (12)
171Level to down (12 to 11)
181Left curve down [R3] (11 to 7)
191Left curve down [R3] (7 to 3)
201Down to level, roll left (3)
21-266Banked left curve [R4] (3)
271Banked left curve [R3] (3)
281Roll left to slope up (3 to 4)
291Left curve up [R3] (4 to 8)
301Up to level (8)
311Level to roll right (8)
32-332Banked right curve [R3] (8)
341Banked right curve [R2] (8)
351Roll right to slope down (8 to 7)
361Down (7 to 6)
371Down (6 to 5)
381Right curve down [R3] (5 to 1)
391Down to level, roll right (1)
40-434Banked right curve [R4] (1)
441Roll right to level (1)
451Level to roll left (1)
461Banked left curve [R3] (1)
471Roll left to slope up (1 to 2)
481Up (2 to 3)
491Up to level, roll left (3)
501Helix down left [R2] (3 to 2)
511Roll left to slope down (2 to 1)
521Down to level (1)
531Level (1)
541Level to up (1 to 2)
551Up (2 to 3)
561Up to level, roll left (3)
571Banked left curve [R3] (3)
581Roll left to level (3)
591Level to roll right (3)
601Banked right curve [R3] (3)
611Roll right to slope down (3 to 2)
621Down (2 to 1)
631Down to level, roll right (1)
64-652Banked right curve [R2] (1)
661Roll right to level (1)
671Level (1)
68-714Brakes [18 mph = 30 km/hr] (1)
721Block brake (1)
731Begin station (1)
74-763Middle station (1)
This file was created in the RCTspace.com Ride Exchange for RCT1 and RCT2 Rides © rcthelp 2003 to the present.
Not to be reproduced without expressed permission.
With thanks to Greg Wolking for permission to use his RCT Track Decoder program.