Build Instructions for: Triple Loopers
by: bri5ber2
File Format: RCT 2 (no expansions)
Ride Type: Looping Roller Coaster (RCT2)
Vehicle Type: (Roller Coaster Trains)
Operating Mode:
Track Segments (Total): 33
Segment Number Type
11Down steep [chain lift] (0 to -3)
21Down steep [chain lift] (-3 to -7)
31Down steep [chain lift] (-7 to -11)
41Down steep [chain lift] (-11 to -15)
51Down steep to down [chain lift] (-15 to -17)
61Down to level [chain lift] (-17)
71Begin station (-17)
8-92Middle station (-17)
101End station (-17)
111Level to roll left (-17)
12-132Banked left curve [R2] (-17)
141Roll left to slope up (-17 to -16)
151Vertical loop left (-16 to -17)
161Down to level, roll right (-17)
17-182Banked right curve [R2] (-17)
191Roll right to slope up (-17 to -16)
201Vertical loop right (-16 to -17)
211Down to level, roll left (-17)
22-232Banked left curve [R2] (-17)
241Roll left to slope up (-17 to -16)
251Vertical loop left (-16 to -17)
261Down to level (-17)
271Level to up (-17 to -16)
281Up to up steep (-16 to -14)
291Steep upward twist right [R1] (-14 to -10)
301Steep upward twist right [R1] (-10 to -6)
311Steep upward twist right [R1] (-6 to -2)
321Steep upward twist right [R1] (-2 to 1)
331Up steep to up (1 to 3)
This file was created in the RCTspace.com Ride Exchange for RCT1 and RCT2 Rides © rcthelp 2003 to the present.
Not to be reproduced without expressed permission.
With thanks to Greg Wolking for permission to use his RCT Track Decoder program.