Build Instructions for: Double Loop
by: Rct2_cool
File Format: RCT 2 (no expansions)
Ride Type: Looping Roller Coaster (RCT2)
Vehicle Type: (Roller Coaster Trains)
Operating Mode:
Track Segments (Total): 82
Segment Number Type
11Middle station (1)
21End station (1)
31Level to up [chain lift] (1 to 2)
41Up [chain lift] (2 to 3)
51Up [chain lift] (3 to 4)
61Up [chain lift] (4 to 5)
71Up [chain lift] (5 to 6)
81Up [chain lift] (6 to 7)
91Up [chain lift] (7 to 8)
101Up [chain lift] (8 to 9)
111Up [chain lift] (9 to 10)
121Up [chain lift] (10 to 11)
131Up [chain lift] (11 to 12)
141Up [chain lift] (12 to 13)
151Up [chain lift] (13 to 14)
161Up [chain lift] (14 to 15)
171Up to level [chain lift] (15)
181Level to down (15 to 14)
191Down to down steep (14 to 12)
201Steep downward twist right [R1] (12 to 8)
211Steep downward twist right [R1] (8 to 4)
221Down steep to down (4 to 2)
231Down (2 to 1)
241Down to level, roll right (1)
25-273Banked right curve [R3] (1)
281Roll right to level (1)
291On-ride photo section (1)
301Level (1)
311Level to roll right (1)
321Helix up right [R3] (1 to 2)
331Roll right to slope up (2 to 3)
341Up to level, roll right (3)
351Banked right curve [R3] (3)
36-372Roll right (3)
38-392Banked right curve [R3] (3)
401Roll right to level (3)
41-444Level (3)
451Level to down (3 to 2)
461Down (2 to 1)
471Down to level (1)
481Level to up (1 to 2)
491Up (2 to 3)
501Vertical loop left (3 to 2)
511Down (2 to 1)
521Down to level (1)
531Level to up (1 to 2)
541Vertical loop right (2 to 1)
551Down to level (1)
561Level to up (1 to 2)
571Up (2 to 3)
581Up (3 to 4)
591Up to level (4)
60-612Level (4)
62-654Brakes [18 mph = 30 km/hr] (4)
661Block brake (4)
671Level to roll right (4)
681Helix down right [R2] (4 to 3)
691Helix down right [R2] (3 to 2)
701Helix down right [R2] (2 to 1)
711Roll right to level (1)
721Block brake (1)
731Begin station (1)
74-829Middle station (1)
This file was created in the RCTspace.com Ride Exchange for RCT1 and RCT2 Rides © rcthelp 2003 to the present.
Not to be reproduced without expressed permission.
With thanks to Greg Wolking for permission to use his RCT Track Decoder program.