Build Instructions for: Corkscrew
by: Dr. Taco
File Format: RCT 2 (no expansions)
Ride Type: Corkscrew Roller Coaster (RCT2)
Vehicle Type:
Operating Mode:
Track Segments (Total): 70
Segment Number Type
11Middle station (1)
21End station (1)
31Level to down (1 to 0)
41Down to level (0)
5-62Right curve [R2] (0)
71Level to up [chain lift] (0 to 1)
81Up [chain lift] (1 to 2)
91Up [chain lift] (2 to 3)
101Up [chain lift] (3 to 4)
111Up [chain lift] (4 to 5)
121Up [chain lift] (5 to 6)
131Up [chain lift] (6 to 7)
141Up [chain lift] (7 to 8)
151Up [chain lift] (8 to 9)
161Up [chain lift] (9 to 10)
171Up [chain lift] (10 to 11)
181Up [chain lift] (11 to 12)
191Up [chain lift] (12 to 13)
201Up to level [chain lift] (13)
211Level to down (13 to 12)
221Down to level, roll right (12)
23-242Banked right curve [R3] (12)
251Roll right to slope down (12 to 11)
261Down to down steep (11 to 9)
271Down steep (9 to 5)
281Down steep (5 to 1)
291Down steep to down (1 to -1)
301Down to level (-1)
311Brakes [45 mph = 76 km/hr] (-1)
321Level to up (-1 to 0)
331Up (0 to 1)
341Up (1 to 2)
351Up (2 to 3)
361Up (3 to 4)
371Up to level, roll right (4)
381Roll right (4)
39-402Banked right curve [R4] (4)
411Roll right (4)
421Roll right to slope down (4 to 3)
431Down (3 to 2)
441Down (2 to 1)
451Down to level, roll right (1)
46-472Banked right curve [R4] (1)
481Roll right to slope down (1 to 0)
491Down to level (0)
501Level (0)
511Half-corkscrew right, normal to inverted (0 to 5)
521Half-corkscrew left, inverted to normal (5 to 0)
531Half-corkscrew right, normal to inverted (0 to 5)
541Half-corkscrew left, inverted to normal (5 to 0)
551Level (0)
561Level to up (0 to 1)
571Up to level, roll right (1)
581Banked right curve [R2] (1)
591Roll right (1)
601Banked right curve [R2] (1)
611Roll right to level (1)
62-654Level (1)
66-672Brakes [18 mph = 30 km/hr] (1)
681Begin station (1)
69-702Middle station (1)
This file was created in the RCTspace.com Ride Exchange for RCT1 and RCT2 Rides © rcthelp 2003 to the present.
Not to be reproduced without expressed permission.
With thanks to Greg Wolking for permission to use his RCT Track Decoder program.